Case Island

Case Island Glass by Suellen ParkerCase Island

 

Suellen Parker, holder of a degree in art from Boston College and owner of Case Island Glass, LLC, creates her pieces by a process known as “glass fusing”. The process involves heating carefully sized pieces of glass with the same COE to high temperatures, causing the pieces to melt or “fuse” together. Each piece is hand-made and fused, often involving several separate firings.

All pieces start as large sheets of glass made specifically for fusing. Suellen uses Bullseye glass products exclusively. The starting shape of the piece is hand cut using diamond-edged etching tools. Next, smaller pieces are hand cut and stacked on the base. Thin glass rods called “stringers” may be used to create straight lines. Care must be taken with colors, because colors may subtlety change during the firing process.  The assembled piece is then placed in a kiln for the initial firing.  Controls are set for the rate of eating the kiln, the fusing temperature (approaching 1,500 degrees), the time to hold the fusing temperature, and the rate of cooling. The entire firing
process, including cool down, takes 12 or more hours. Some pieces have three separate firings.

 

Case Island

5 inch Dish

Case Island Glass

12 inch square bowl

Case Island Bowl

12″ Multi square bowl

Case Island

15 inch round bowl

Case Island Glass

18 Inch Bowl

Case Island Glass

18 Inch Platter on Stand

Case Island Glass

24 Inch Platter